Nancy Fratti Tools 2

Tools 1 Cylinder Bx Sup

GOVERNOR JEWELS

For Cylinder and Disc Boxes. Synthetic Rubies, these are the next hardest thing to a diamond (a hardness of 9 on a scale of 1-10)! If you're unsure of the size, you can send your jewel cap for a perfect fit (no extra charge).

#J30 - 3.0mm - $16.00 ea.
#J35 - 3.5mm - $18.00 ea.
#J40 - 4.0mm - $20.00 ea.
#J45 - 4.5mm - $22.00 ea.
#J50 - 5.0mm - $24.00 ea.
#J55 - 5.5mm - $26.00 ea.
#J60 - 6.0mm - $28.00 ea.
#J65 - 6.5mm - $30.00 ea.

Price Discounts: 6-11 pcs. = 5%; 12+ pcs. = 10% (mix or match sizes)

____________________________________________

TOOL STEEL

Oil Hardening - for making replacement comb teeth. 1/2" Wide Flat Stock:

#TS1612 - 1/16" x 1/2" x 6" ------$5.95/pc.
#TS5612 - 5/64" x 1/2" x 6" -----$5.95/pc.
#TS1812 - 1/8" x 1/2" x 6" ------$5.95/pc.
#TS5312 - 5/32" x 1/2" x 6" ------$5.95/pc.
#TS1818 - 1/8" x 1/8" x 6" -----$12.95/pc.
#TS3636 - 3/16" x 3/16" x 6" ----$10.95/pc. Flat Stock:
#TS3212 - 3/32" X 1/2" X 6" ------$5.95/pc. Square Stock:
#TS1820 - 1/8" x 2" wide x ?"--$2.25/inch (specify # of inches)

____________________________________________

TIP WIRE

For replacing tooth tips in cylinder and disc boxes. Hardened, tempered steel. Use our slitting discs and Tix Solder (on the previous page) to slit and solder tooth tips.

#TW10 - .010" thick x .035" wide x 12" long - $1.50/foot
#TW14 - .014" thick x .033" wide x 12" long - $1.50/foot

____________________________________________

TAPER PINS

In brass and steel. Measured smallest tip x largest tip x length.

#TP30B Brass .030" x .065" x 1.00" $0.95/25
#TP30S Steel .030" x .065" x 1.00" $0.95/25
#TP40S Steel .040" x .075" x 1.00" $0.95/25
#TP45B Brass .045" x .059" x .595" $0.95/25
#TP45S Steel .045" x .059" x .595" $0.95/25
#TP55B Brass .055" x .068" x .635" $0.95/25
#TP70B Brass .070" x .100" x 1.25" $1.50/25

I have smaller taper pins on the "CYLINDER BOX SUPPLIES" page.

____________________________________________

SHOULDER SCREWS

Metric threads. Fits many of the original holes in bedplates, etc. Made to fit with our male and female Geneva Stops and Pawls (see Parts - Cylinder Boxes).

#S45 - $4.50/10 asst. sizes

____________________________________________

CLICK SPRINGS

Spring steel...replaces the broken/cracked click springs on the winding handles pawls and governor detents.

#CSL57 - tab on left - $6.25 each
#CSR57 - tab on right - $6.25 each

____________________________________________

HOOKS

For Keywind Cases, Organettes, etc.

#H26S - small, 1/2" long - $0.50 each
#H26M - med, 3/4" long - $0.50 each
#H26L - large, 1" long - $0.50 each

____________________________________________

FELT PADS

Put under the feet of any music box (or any other object) to protect your furniture from scratches. Will not inhibit sound! Approx. 1/8" thick x 3/4" diam., brown.

#S21 - $0.50/4

____________________________________________

LEATHER

Fine grain, thin black leather. For making new tabs to lift the glass lids of cylinder boxes and some disc boxes. Approx. 3 1/2" x 2 1/2" piece.

#S52 - $1.25/pc.

____________________________________________

HINGES

Perfect for use on glass dust covers of cylinder boxes, and other small projects! This was a hardware store buy-out...when they're gone, they're gone! Size: Approx. 1/2" x 9/16"

#S24 - $2.50/pr.

____________________________________________

OILER

#S53 - $3.95 each

____________________________________________

MAINSPRING GREASE

I recommend the synthetic automotive greases found in automotive and discount stores. The greases with Teflon or Lythium have worked well for me.

____________________________________________

MUSIC BOX OIL

This is a natural, petroleum based heavy clock oil...the same one I've been using for years.

#S54 - 1/4 oz. bottle - $7.95

(WARNING - Do not use natural and synthetic oils in the same place...use only one or the other...putting both in the same oil hole will cause it to gel and get sticky!)

Empty oiling bottle for above listed oil. Needle applicator. Won't dry out and crack!

____________________________________________

STEM GREASE

Synthetic Use on heavier worms, stays where you put it! Tube is enough to last a long time!

#S12 - tube, $32.00

Tools 1 Cylinder Bx Sup